Requirement of multi LED illumination sets (26 nos: 14 yellow, 8 red, 4 green) for Ministry of Railways
Read the full title from the noticeHide the full title
Set of multi LED illumination consisting (1) Yellow-14 nos (2) Red -08 nos (3) Green -04 nos (3 items 26 nos) to specn. no. CLW/ES/3/0072 ALT-H type:BA95 18 m A-24 V DC.
Ministry of Railways
Place not stated
- Estimated contract value
- Not published
- No estimate in the notice
- EMD
- Not published
- Tender fee
- Not published
- Bids close
- 20 Nov 2026, 11:30 am IST
- 33 hours left
Summary
Set of multi LED illumination to specification CLW/ES/3/0072, ALT-H type BA95 18 m A-24 V DC
AI summary. Check the official portal before you bid.
Scope of work
- Electrical
Eligibility
Submission checklist
Commercial terms
Contract value, EMD, tender fee and performance security are separate amounts; they are never added up.
Evaluation
Tender documents
The portal has not listed any files for this tender yet.
Key dates
- Published30 Jul 2026, 5:15 pm IST
- Bids close20 Nov 2026, 11:30 am IST
- Bid opening20 Nov 2026, 11:30 am IST
Location and buyer
Place not stated
The tender doesn't say where the work is
Who issued it
- Ministry of Railways
Changes, clarifications and contacts
Reference
- Tender ID
- 107140405
- Reference
- 24261599
- Source
- CPPP (GeM-CPPP central list)
- Last updated
- 18 Nov 2026, 11:40 pm IST
Always verify details on the official portal before bidding.
Tenders most like this one
Open Electrical tenders closest to it in work and place
- Electrical4 days left
Set of blocking diodes for illumination test (position 123) and accessories, Ministry of Railways
One set has 4 items totalling 17 pieces, including diode block, 14-pole connector socket and contacts, as per CLW specification CLW/ES/3/0055
Place not stated
Ministry of Railways
Value not publishedCloses 23 Nov, 11:30 am - Electrical15 days left
Requirement of tinned copper cable sleeve 300 sq mm for Type 23B traction motor terminal, Ministry of Railways
Tinned copper cable sleeve 300 sq mm for T.M. Type 23B terminal, as per CLW Spec. No. CLW/ES/SK-2/S-25/F, Sheet No. 20
Place not stated
Ministry of Railways
Value not publishedCloses 4 Dec, 11:30 am - Electrical7 days left
Requirement of horizontal sleeve front and rear sets for VCB for Ministry of Railways
Set of horizontal sleeve front and rear for VCB, each set of 2 items, to AAL or BTL part numbers
Place not stated
Ministry of Railways
Value not publishedCloses 26 Nov, 2:25 pm - Electrical35 hours left
Requirement of brushless 110 V DC railway carriage fans, 400 mm sweep, fixed type, to RDSO specification for Ministry of Railways
Fans must conform to RDSO specification RDSO/PE/SPEC/TL/0021/2005 (Rev-3) with Amendment 1 and RCF Annexure-1
Place not stated
Ministry of Railways
Value not publishedCloses 20 Nov, 1:30 pm - Electrical4 days left
Requirement of HV cables with plug connectors for WAG-9 locomotive as per CLW specification, Ministry of Railways
45 kV, 185 sq mm copper XLPE HV cable with plug connector kit (transformer end and roof-top end) per CLW spec CLW/ES/3/0251 Rev 2; cable length about 4700 mm
Place not stated
Ministry of Railways
Value not publishedCloses 23 Nov, 12:30 pm - Electrical7 days left
Requirement of 2000 mm x 1000 mm class C insulating mats for 33 kV for Ministry of Railways
Insulating mats 2000 mm x 1000 mm, class C, suitable for 33 kV, to IS:15652-2006 per annexure A
Place not stated
Ministry of Railways
Value not publishedCloses 26 Nov, 2:25 pm