Skip to content
WooTenders
Open, 4 days leftElectricalCPPP (GeM-CPPP central list) Tender ID 107204806

Requirement of HV cables with plug connectors for WAG-9 locomotive as per CLW specification, Ministry of Railways

Read the full title from the notice

H.v.Cables with Plug Connector for Wag-9 Loco as per CLW Specn. No. CLW/Es/3/0251.Rev 2. Own Make Plug Connector Consists of Following Components. a. Transformer End. 1. Elbow Connector 755 BLS 1 No. 2. Basic Insulating Plug 750 Bip 1 No. 3. Cable Adopter 755 Ca-M 1 No. 4. Spade Connector for 185 SQ. MM Copper Conductor 03700300 1 No. 5. Shield Adaptor for Earthing 20 Ma-L 1 No. 6. 45 KV, Ic X 185 SQ.MM Copper, Xlpe Insulated H.v. Cable. Length of Cable 4700 MM (Approx) B. at Roof Top. 1. Elb

Ministry of Railways

Place not stated

Estimated contract value
Not published
No estimate in the notice
EMD
Not published
Tender fee
Not published
Bids close
23 Nov 2026, 12:30 pm IST
4 days left

Summary

45 kV, 185 sq mm copper XLPE HV cable with plug connector kit (transformer end and roof-top end) per CLW spec CLW/ES/3/0251 Rev 2; cable length about 4700 mm

AI summary. Check the official portal before you bid.

Scope of work

  • Electrical

Eligibility

Submission checklist

Commercial terms

Contract value, EMD, tender fee and performance security are separate amounts; they are never added up.

Evaluation

Tender documents

The portal has not listed any files for this tender yet.

Key dates

  1. Published21 Oct 2026, 10:49 am IST
  2. Bids close23 Nov 2026, 12:30 pm IST
  3. Bid opening23 Nov 2026, 12:30 pm IST

Location and buyer

Place not stated

The tender doesn't say where the work is

Who issued it

  1. Ministry of Railways

Changes, clarifications and contacts

Reference

Tender ID
107204806
Reference
20264030
Source
CPPP (GeM-CPPP central list)
Last updated
18 Nov 2026, 11:40 pm IST

Always verify details on the official portal before bidding.

Tenders most like this one

Open Electrical tenders closest to it in work and place

  1. Electrical15 days left

    Requirement of tinned copper cable sleeve 300 sq mm for Type 23B traction motor terminal, Ministry of Railways

    Tinned copper cable sleeve 300 sq mm for T.M. Type 23B terminal, as per CLW Spec. No. CLW/ES/SK-2/S-25/F, Sheet No. 20

    Place not stated

    Ministry of Railways

    Value not publishedCloses 4 Dec, 11:30 am
  2. Electrical34 hours left

    Capacitor 0.22 MFD 2000 V for WAG-9 locomotive, reserved for CLW approved source, Ministry of Railways

    Capacitor of ±10 percent, 2000 V, ICAR or EPCOS make or similar, as per ABB ID; item reserved for CLW approved sources only

    Place not stated

    Ministry of Railways

    Value not publishedCloses 20 Nov, 12:30 pm
  3. Electrical6 days left

    Motor contactor as per CLW specification and drawings, Ministry of Railways

    Place not stated

    Ministry of Railways

    Value not publishedCloses 25 Nov, 10:30 am
  4. Electrical34 days left

    High voltage cables with plug connector, Ministry of Railways

    Place not stated

    Ministry of Railways

    Value not publishedCloses 23 Dec, 11:30 am
  5. Electrical11 days left

    2 static converters (SIV) 130 KVA for conventional electric locomotives, Ministry of Railways

    Static converters for conventional electric locomotives along with commissioning as per RDSO/2018/EL/Spec/0140 Rev 1

    Place not stated

    Ministry of Railways

    Value not publishedCloses 30 Nov, 11:30 am
  6. Electrical7 days left

    Requirement of 2000 mm x 1000 mm class C insulating mats for 33 kV for Ministry of Railways

    Insulating mats 2000 mm x 1000 mm, class C, suitable for 33 kV, to IS:15652-2006 per annexure A

    Place not stated

    Ministry of Railways

    Value not publishedCloses 26 Nov, 2:25 pm