Requirement of HV cables with plug connectors for WAG-9 locomotive as per CLW specification, Ministry of Railways
Read the full title from the noticeHide the full title
H.v.Cables with Plug Connector for Wag-9 Loco as per CLW Specn. No. CLW/Es/3/0251.Rev 2. Own Make Plug Connector Consists of Following Components. a. Transformer End. 1. Elbow Connector 755 BLS 1 No. 2. Basic Insulating Plug 750 Bip 1 No. 3. Cable Adopter 755 Ca-M 1 No. 4. Spade Connector for 185 SQ. MM Copper Conductor 03700300 1 No. 5. Shield Adaptor for Earthing 20 Ma-L 1 No. 6. 45 KV, Ic X 185 SQ.MM Copper, Xlpe Insulated H.v. Cable. Length of Cable 4700 MM (Approx) B. at Roof Top. 1. Elb
Ministry of Railways
Place not stated
- Estimated contract value
- Not published
- No estimate in the notice
- EMD
- Not published
- Tender fee
- Not published
- Bids close
- 23 Nov 2026, 12:30 pm IST
- 4 days left
Summary
45 kV, 185 sq mm copper XLPE HV cable with plug connector kit (transformer end and roof-top end) per CLW spec CLW/ES/3/0251 Rev 2; cable length about 4700 mm
AI summary. Check the official portal before you bid.
Scope of work
- Electrical
- Substations, transformers & lines
- Building wiring & fittings
Eligibility
Submission checklist
Commercial terms
Contract value, EMD, tender fee and performance security are separate amounts; they are never added up.
Evaluation
Tender documents
The portal has not listed any files for this tender yet.
Key dates
- Published21 Oct 2026, 10:49 am IST
- Bids close23 Nov 2026, 12:30 pm IST
- Bid opening23 Nov 2026, 12:30 pm IST
Location and buyer
Place not stated
The tender doesn't say where the work is
Who issued it
- Ministry of Railways
Changes, clarifications and contacts
Reference
- Tender ID
- 107204806
- Reference
- 20264030
- Source
- CPPP (GeM-CPPP central list)
- Last updated
- 18 Nov 2026, 11:40 pm IST
Always verify details on the official portal before bidding.
Tenders most like this one
Open Electrical tenders closest to it in work and place
- Electrical7 days left
Requirement of 2000 mm x 1000 mm class C insulating mats for 33 kV for Ministry of Railways
Insulating mats 2000 mm x 1000 mm, class C, suitable for 33 kV, to IS:15652-2006 per annexure A
Place not stated
Ministry of Railways
Value not publishedCloses 26 Nov, 2:25 pm - Electrical5 days left
Supply of 25kV drop out fuse element caps for Ministry of Railways, to RDSO specification
25kV drop out fuse element caps of 1 Amp capacity as per RDSO specification ETI/PSI/14(1/86) with A and C Slip No.1 or latest
Place not stated
Ministry of Railways
Value not publishedCloses 24 Nov, 2:30 pm - Electrical7 days left
Resistance 4.7 ohm, 1000 watt, for RC damping panel of transformer auxiliary winding, Ministry of Railways
As per drawing MEI/W-WRES/26122017-12 and CLW specification CLW/ES/C-47/1; 100 mm inverted clamp height for a 400 x 250 mm panel board; makes ESCOL, VEPL, PEC, SUR, Kiyosh or equivalent
Place not stated
Ministry of Railways
Value not publishedCloses 26 Nov, 11:30 am - Electrical4 days left
Requirement of earthing cable conforming to RC for Ministry of Railways
Place not stated
Ministry of Railways
Value not publishedCloses 23 Nov, 11:00 am - Electrical4 days left
Requirement of 16 sq mm electron beam irradiated copper cable, 1.8/3.0 kV, Ministry of Railways
Place not stated
Ministry of Railways
Value not publishedCloses 23 Nov, 11:30 am - Electrical33 days left
Requirement of replacement kit for single bottle VCB, Schneider Electric type 22 CB part no. 5510740, Ministry of Railways
Replacement kit of 15 sub-parts for a single bottle VCB of Schneider Electric, type 22 CB, as per annexure
Place not stated
Ministry of Railways
Value not publishedCloses 22 Dec, 11:30 am